Subscribe to news Approved Product Quality is a Key to Customer’s Serenity.

18/09/19

Quality is one of important requirements to products which remains a significant factor in any business all the time.

LAMSYSTEMS sets a high value on the quality of produced equipment. Therefore, in 2014, one of the most popular models – Class II biological safety cabinet NEOTERIC – received a certificate* of conformance to the European standard EN 12469:2000 at TÜV NORD organization (Hamburg, Germany).

For the fifth time, a factory audit has been performed for asserting LAMSYSTEMS’ right to place the German quality GS mark on its products (Geprüfte Sicherheit, translated from German, means Guaranteed Safety). The inspection was held from September 12th to 14th, 2019 and was carried out by the inspector Ms. Svenja Schneider from the international certification center TÜV NORD.

At the mandatory annual audit of a manufacturer that had received a TÜV certificate, demonstration of the certified product assembly technology and the factory acceptance tests is obligatory.

During the inspection, the TUV NORD inspector emphasized the high level of quality management system of the factory as well as the competence of specialists carrying out the assembly, final testing and adjustment of the products.

The result of the audit was the confirmation of compliance of the Class II biological safety cabinet NEOTERIC to TÜV NORD certificate. This means that the manufactured product has the same parameters as the sample which successfully passed certification tests in 2014.

In addition to confirming the certificate in effect, preliminary tests of the new model of biosafety cabinet – the Class II biological safety cabinet SAVVY SL with power driven front sash – introduced for certification were passed successfully. High approval received during the testing shows that the moment of getting the new TÜV certificate is coming before too long.

*You can verify the Certificate at the official website of the organization by opening the document "List of certified safety cabinets" on page 5. 

 

« Back

17/07/20

TÜV: Welcome on Board!

One more LAMSYSTEMS serial cabinet got an international quality certificate.

15/05/20

On the 15th of May 2020, it got 20 years since the foundation of LAMSYSTEMS CC

LAMSYSTEMS created in 2000 has gone through a dynamic development process and, today, it already has a high-capacity manufacturing site fitted with advanced machinery and equipment.

24/12/19

Merry Christmas and Happy New Year!

Merry Christmas and Happy New Year!
Wishing you a season of joy and prosperity in 2020!

06/12/19

Pharmtech & Ingredients 2019

LAMSYSTEMS is a permanent participant of Pharmtech & Ingredients exhibition. This year, the event was held in Moscow Crocus Expo IEC from the 19th to 22nd of November being the 21st exhibition in succession.

04/12/19

EXPO-RUSSIA VIETNAM 2019 Exhibition in Russian-Vietnamese Bilateral Year

On November 14-16, the III International Industrial Exhibition EXPO-RUSSIA VIETNAM 2019 was held in the capital of the Socialist Republic of Vietnam (SRV), Hanoi city.

30/10/19

EXPO-RUSSIA VIETNAM 2019

The III International Industrial Exhibition EXPO-RUSSIA VIETNAM 2019 is going to be held in Hanoi (the Socialist Republic of Vietnam) on November 14-16, 2019.

23/10/19

Visit Our Booth at Pharmtech & Ingredients Exhibition!

The 21st international exhibition of equipment, raw materials and technologies for pharmaceutical production Pahrmtech & Ingredients is going to be held in Moscow from the 19th to the 22st of November 2019

09/09/19

LAB-SUPPLY 2019 Dresden

LAMSYSTEMS Partners, EWALD Innovationstechnik GmbH, took part in the regional laboratory exhibition LAB-SUPPLY 2019, held on August 28, 2019 at the MARITIM Hotel & Internationales Congress Center in Dresden, Germany.

28/06/19

ESHRE 2019 Conference in Austria

The 35th annual conference of the European Society of Human Reproduction and Embryology (ESHRE) was held on June 23-26, 2019 in Vienna, Austria.