Subscribe to news Innovative safety control

18/04/17

Specialists of the LAMSYSTEMS Company implemented innovative approach providing protection efficiency of the microbiological safety cabinet class II NEOTERIC.

Microbiological safety cabinets are used for operator, product, and environment protection when working with hazardous or potentially hazardous microorganisms. Traditional way of protection is creation of the barriers preventing circulation of the pathogens. For instance, a typical barrier would be a housing of the cabinet, filters, an air curtain in the work opening, and a laminar down flow in the work chamber.

Since air flow has the most unstable barrier characteristics, it requires incessant monitoring of the airflows’ velocity and interaction balance. Therefore all microbiological safety cabinets are supplied with sensors monitoring the airflows’ parameters. One of the most difficult solutions for each manufacturer is calibration of sensors installed since cabinet’s safety efficiency depends on sensor’s precise measurements.

LAMSYSTEMS engineers offered a systematic solution incorporating pressure sensors in the construction of the LAMSYSTEMS cabinets. It has obvious advantages in comparison with the hot-wire sensors usually used in the cabinets of such types. Pressure sensors are resistant to dust, humidity, and temperature changes. They keep indicated parameters precise during the whole period of exploitation without additional periodical adjustment. Calibration of the microprocessor control system is done only once during the manufacturing process by the special technique using the calibrator and the unique software.

When cabinet is used microprocessor control system processes data from pressure control points and runs them in a special algorithm. Distribution of the pressure control points has its own peculiarities and is a manufacturer’s know-how. It allows monitoring of airflow interactions with high-precision and minimal number of sensors installed.

Any, even minor, changes in velocity, direction or balance of the airflows causing drop in cabinet’s safety will be registered by the control system and will automatically trigger an audible alarm.

Innovative developments implemented in the microbiological safety cabinet class II NEOTERIC by the LAMSYSTEMS specialists guarantee high efficiency in protection of an operator, product, and environment when working with hazardous microorganisms and biological agents.

« Back

24/12/19

Merry Christmas and Happy New Year!

Merry Christmas and Happy New Year!
Wishing you a season of joy and prosperity in 2020!

06/12/19

Pharmtech & Ingredients 2019

LAMSYSTEMS is a permanent participant of Pharmtech & Ingredients exhibition. This year, the event was held in Moscow Crocus Expo IEC from the 19th to 22nd of November being the 21st exhibition in succession.

04/12/19

EXPO-RUSSIA VIETNAM 2019 Exhibition in Russian-Vietnamese Bilateral Year

On November 14-16, the III International Industrial Exhibition EXPO-RUSSIA VIETNAM 2019 was held in the capital of the Socialist Republic of Vietnam (SRV), Hanoi city.

30/10/19

EXPO-RUSSIA VIETNAM 2019

The III International Industrial Exhibition EXPO-RUSSIA VIETNAM 2019 is going to be held in Hanoi (the Socialist Republic of Vietnam) on November 14-16, 2019.

23/10/19

Visit Our Booth at Pharmtech & Ingredients Exhibition!

The 21st international exhibition of equipment, raw materials and technologies for pharmaceutical production Pahrmtech & Ingredients is going to be held in Moscow from the 19th to the 22st of November 2019

18/09/19

Approved Product Quality is a Key to Customer’s Serenity.

Quality is one of important requirements to products which remains a significant factor in any business all the time.

09/09/19

LAB-SUPPLY 2019 Dresden

LAMSYSTEMS Partners, EWALD Innovationstechnik GmbH, took part in the regional laboratory exhibition LAB-SUPPLY 2019, held on August 28, 2019 at the MARITIM Hotel & Internationales Congress Center in Dresden, Germany.

28/06/19

ESHRE 2019 Conference in Austria

The 35th annual conference of the European Society of Human Reproduction and Embryology (ESHRE) was held on June 23-26, 2019 in Vienna, Austria.

20/06/19

Romanian Distributor Visits LAMSYSTEMS

Representatives of S.C. SAPACO 2000 S.A., Bucharest, an exclusive distributor of LAMSYSTEMS products in Romania since 2017, visited our manufacturing site in the first half of June.