Subscribe to news Laminar Flow Cabinet for Bioprinter

17/01/18

LAMSYSTEMS designed a microbiological safety cabinet with enlarged depth and height of the work chamber for bioprinter installation.

Contemporary world dictates its own terms. New inventions and demands for equipment enrich the scientific world year by year. Increasingly, our clients need customized design for their complex and challenging projects.

Long-term experience and high qualification of our personnel, application of own original design and developments as well as advanced manufacturing equipment allow production of any non-standard customized product. Over the life of the company, we have developed more than 1500 models; and each subsequent task gets even more challenging and interesting. 

Recently, our company got a non-standard request from a foreign company. In his laboratory, the customer intended to use a micro bioreactor that required clean air environment and protection of the laboratory personnel for efficient operation.

A class II microbiological safety cabinet SAVVY was given the best fit for this purpose with a single limitation: dimensions of the micro bioreactor exceeded dimensions of the work chamber of the series-produced cabinets. Therefore, based on standard SAVVY, the specialists of LAMSYSTEMS designed a cabinet with enlarged depth and height of the work chamber without compromising the protection efficiency of the cabinet.

Furthermore, the customized biosafety cabinet kept all other advantages of its series: low noise level, power consumption and heat emission, the pullout UV unit, the touchscreen control panel, etc. The cabinet was sent to the customer and now successfully operates at the scientific laboratory.

A little later, we received one more order for SAVVY with an enlarged work chamber to be equipped with bioengineering 3D printers for printing the implants and extra-cellular matrixes using organic materials in Europe. As of today, the equipment has already been manufactured, delivered and successfully operates at customer’s site.

Finally, many customized products become serial later since thoroughly designed and high-quality fabricated structure of such products comes into common use in similar industries.

         

« Back

24/12/19

Merry Christmas and Happy New Year!

Merry Christmas and Happy New Year!
Wishing you a season of joy and prosperity in 2020!

06/12/19

Pharmtech & Ingredients 2019

LAMSYSTEMS is a permanent participant of Pharmtech & Ingredients exhibition. This year, the event was held in Moscow Crocus Expo IEC from the 19th to 22nd of November being the 21st exhibition in succession.

04/12/19

EXPO-RUSSIA VIETNAM 2019 Exhibition in Russian-Vietnamese Bilateral Year

On November 14-16, the III International Industrial Exhibition EXPO-RUSSIA VIETNAM 2019 was held in the capital of the Socialist Republic of Vietnam (SRV), Hanoi city.

30/10/19

EXPO-RUSSIA VIETNAM 2019

The III International Industrial Exhibition EXPO-RUSSIA VIETNAM 2019 is going to be held in Hanoi (the Socialist Republic of Vietnam) on November 14-16, 2019.

23/10/19

Visit Our Booth at Pharmtech & Ingredients Exhibition!

The 21st international exhibition of equipment, raw materials and technologies for pharmaceutical production Pahrmtech & Ingredients is going to be held in Moscow from the 19th to the 22st of November 2019

18/09/19

Approved Product Quality is a Key to Customer’s Serenity.

Quality is one of important requirements to products which remains a significant factor in any business all the time.

09/09/19

LAB-SUPPLY 2019 Dresden

LAMSYSTEMS Partners, EWALD Innovationstechnik GmbH, took part in the regional laboratory exhibition LAB-SUPPLY 2019, held on August 28, 2019 at the MARITIM Hotel & Internationales Congress Center in Dresden, Germany.

28/06/19

ESHRE 2019 Conference in Austria

The 35th annual conference of the European Society of Human Reproduction and Embryology (ESHRE) was held on June 23-26, 2019 in Vienna, Austria.

20/06/19

Romanian Distributor Visits LAMSYSTEMS

Representatives of S.C. SAPACO 2000 S.A., Bucharest, an exclusive distributor of LAMSYSTEMS products in Romania since 2017, visited our manufacturing site in the first half of June.