Subscribe to news European Audit. Four Successful Years!

15/08/18

The annual inspection of the biosafety cabinet Neoteric conformance with the European standards was successfully passed for the fourth time.

In 2014, for the first time, the Class II biological safety cabinet NEOTERIC passed the certification tests for conformance with the European standard  EN 12469:2000 at TÜV NORD organization (Hamburg, Germany) that was attested with a corresponding certificate*.

Ever since, each year, our company asserts its right to place the European quality GS mark on its products. The obligatory annual audit of the manufacturer that received the TÜV certificate is meant to affirm that the serial manufacturing process complies with all the required standards and the output products have the same quality characteristics as the certified sample.

This year, the inspection was held in the beginning of August. The auditor was the representative of the international certification center TÜV NORD (Hamburg, Germany) Mr. Jan Ott.

In the course of audit, the whole set of factory acceptance tests that each biosafety cabinet passes at the final stage of production was inspected. The auditor checked not only the product itself but also the entire manufacturing process: equipment, quality control system, production stages, instrumentation and personnel qualification.

As a result, the annual factory audit was passed unconditionally. The TÜV inspector highlighted the efficiency of the quality control system as well as compliance of the manufacturing organization with the requirements and standards of EU.

Furthermore, during his visit, the inspector carried out the preliminary testing of the biological safety cabinet SAVVYSL. The cabinet has lower level of noise (compared to its foregoer), modified front window lifting configuration and an adjustable stand**. Upon the test completion, the TÜV inspector recommended this model for main certification testing to be carried out in Hamburg.   

*You can verify the Certificate at the official website of the organization by opening the document List of certified safety cabinets on page 7. 

**Not part of the standard configuration, can be ordered as an additional option.

                       

« Back

24/12/19

Merry Christmas and Happy New Year!

Merry Christmas and Happy New Year!
Wishing you a season of joy and prosperity in 2020!

06/12/19

Pharmtech & Ingredients 2019

LAMSYSTEMS is a permanent participant of Pharmtech & Ingredients exhibition. This year, the event was held in Moscow Crocus Expo IEC from the 19th to 22nd of November being the 21st exhibition in succession.

04/12/19

EXPO-RUSSIA VIETNAM 2019 Exhibition in Russian-Vietnamese Bilateral Year

On November 14-16, the III International Industrial Exhibition EXPO-RUSSIA VIETNAM 2019 was held in the capital of the Socialist Republic of Vietnam (SRV), Hanoi city.

30/10/19

EXPO-RUSSIA VIETNAM 2019

The III International Industrial Exhibition EXPO-RUSSIA VIETNAM 2019 is going to be held in Hanoi (the Socialist Republic of Vietnam) on November 14-16, 2019.

23/10/19

Visit Our Booth at Pharmtech & Ingredients Exhibition!

The 21st international exhibition of equipment, raw materials and technologies for pharmaceutical production Pahrmtech & Ingredients is going to be held in Moscow from the 19th to the 22st of November 2019

18/09/19

Approved Product Quality is a Key to Customer’s Serenity.

Quality is one of important requirements to products which remains a significant factor in any business all the time.

09/09/19

LAB-SUPPLY 2019 Dresden

LAMSYSTEMS Partners, EWALD Innovationstechnik GmbH, took part in the regional laboratory exhibition LAB-SUPPLY 2019, held on August 28, 2019 at the MARITIM Hotel & Internationales Congress Center in Dresden, Germany.

28/06/19

ESHRE 2019 Conference in Austria

The 35th annual conference of the European Society of Human Reproduction and Embryology (ESHRE) was held on June 23-26, 2019 in Vienna, Austria.

20/06/19

Romanian Distributor Visits LAMSYSTEMS

Representatives of S.C. SAPACO 2000 S.A., Bucharest, an exclusive distributor of LAMSYSTEMS products in Romania since 2017, visited our manufacturing site in the first half of June.