Subscribe to news Design Specifics of the Biosafety Cabinet for Cytotoxics CYTOS

16/05/17

Microbiological safety cabinet CYTOS by LAMSYSTEMS was developed with consideration of working peculiarities with cytotoxic substances and specimens for chemotherapy. Unlike standard biosafety cabinets class II type A2, CYTOS is equipped with additional safety system. It includes preliminary filters for purification of the air exhausted from the work chamber. They are installed right under the tabletop. The reason behind it is that cytotoxic agents can not be deactivated with decontamination; therefore they impose great toxic threat to the operator and service personnel.   

To increase protective efficiency of the cytotoxic safety cabinet LAMSYSTEMS engineers upgraded the air exhaust purification system. Preliminary cartridge filters that were used before are now substituted with cylindrical filters. In addition, the number of filters became four instead of previously used two. Cylindrical filter are more favorable due to their higher adaption to utilization. Filter substitution is performed inside the work chamber of the switched on cabinet by single person.

In addition, the high quality filtering material helped in decreasing the noise level of the working cabinet and therefore raising its customer appeal.

Biosafety cabinet CYTOS by LAMSYSTEMS is the microbiological safety cabinet class II type A2 according the standards classification EN 12469:2000 and NSF/ANSI 49. The name of the cabinet according to DIN 12980 is the safety cabinet for cytotoxic substances. Cabinet model name is “CYTOS”.

 

« Back

24/09/18

The IV Applied Science Conference on Biological Safety Cabinets, Protective Clothing and Isolation Systems

The IV Applied Science Conference Microbiological Safety Cabinets. Work and Protective Clothing. Antiplague Costumes. Isolation Systems. was held from the 11th to 13th of September at LAMSYSTEMS premises.

15/08/18

European Audit. Four Successful Years!

The annual inspection of the biosafety cabinet Neoteric conformance with the European standards was successfully passed for the fourth time.

20/06/18

ACHEMA 2018: Outcomes

LAMSYSTEMS introduced its standard as well as newly-designed products at the international exhibition.

17/05/18

Lamsystems Portable Isolator in South Korea

Representatives of LAMSYSTEMS holding visited international exhibition in South Korea to demonstrate their latest development: a portable isolator for transportation of patients suspected of being infected with especially hazardous diseases.

10/05/18

Workshop for German Specialists

A workshop for medical center technical specialists was held as part of the conference in Berlin.

07/05/18

Visit Our Stand at ACHEMA-2018!

LAMSYSTEMS products are to be exhibited at international specialized trade fair ACHEMA-2018 that is going to be held at Frankfurt am Main (Germany) from the 11th to the 15th of June.

25/04/18

Class II Biosafety Cabinet VIS-À-VIS: top protection efficiency!

Specialists from Analytics and Qualification Department studied whether the configuration of VIS-À-VIS cabinet ensures the required level of protection.

05/04/18

Individual Approach. Guaranteed result!

Lamsystems specialists assisted their customer in solving one more specialized problem by designing customized equipment.

17/01/18

Laminar Flow Cabinet for Bioprinter

LAMSYSTEMS designed a microbiological safety cabinet with enlarged depth and height of the work chamber for bioprinter installation.